Master version, full protocols, VR reading online
2023 New FoxFlash Super Strong ECU TCU Clone and Chip Tuning Tool
Free update. No subscription, no annual fee.
Auto checksum, two Years Warranty.
Winols damos and A2L supply for free.
We’re proud to introduce you to foxFlash®, a new, unique and revolutionary tool for automotive professionals, tuners and engine calibration engineers.
FoxFlash is a powerful solution developed for professional chiptuners, calibration engineers and control unit (ECU and TCU) repair shops. foxFlash includes multi-method control unit programming for tuning ability,this tool from tuner design ,so you can get many of them support.
Since the foxFlash® is so much more than just an ECU programming tool, it simply can’t be compared to any traditional flash tool. Despite other tools how good, this is being good tools for read/write operations, we supply many important features, both on the developer side as in daily use. That is why we recommend foxFlash.
Quick start basics:
- Master version
- Full protocols open
- VR read online work (some ecu need use our VR system, tool auto connect to ousr server donload file )
- ECU can be restored to original if your ecu was damage or meet some bad tuning, use our tool can restore to original.
- Free update. No subscription, no annual fee.
- No VPN needed. Professional Online support, Faster server (1000M/S),.
- Supports WiFi hotspot, convenient for outdoor work
- Auto checksum
- Online support
- Two Years Warranty.
- Excellent technical support.
- Help desk and tuner account
- ECU and TCU connect wires with pdf
- Shipping from US/UK/EU, Fast & No Tax! (worldwide trans )
- Special functions
- Auto support eeprom and flash checksum
- Support MEDC17 free clone service (most of others tool need patch the files after read out,but ours is free)
- Software can be download on official website: https://www.dfb-technology.com/
- With the Latest firmware and updates. Use better quality BOM and PCB. More stable, full proof, and reliable.
- FoxFlash ECU TCU Driver List
- Language: Italian, English, Dutch, French, Spanish, Polish, Portuguese, Romanian, Czech, Turkish
- Foxflash Manager app can be installed up to 6 laptops
1. ensure good internet
2. Device connected and powered (should show in windows device manager)
3. open manager
4. click ACTIVE 4. DO NOT CLOSE MANAGER
5. Open foxflash app.
Note you may need to disable windows automatic time sync feature.
FoxFlash Manager App V1.3.0:
The manager has been improved and now 6 computers to 1 tool.
Your tool can now be used on a total of 6 computers without need to unbind.
Foxflash New Software Updates in January 2023
January 27, 2023
ECU UPDATE New Protocols for Bentley Skoda (BOSCH )
Today we added multiple protocols for Bentley, Skoda, Honda, Volvo, etc. More info on supported ECUs and cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BAIC Bosch ME17.8.8 TC1728: Senova x25 1.5 VTI (2016), Senova X35 1.5 VTI (2016) , BJ20 1.5 VTI (2016)(BOOT)
Honda Bosch ME17.9.55 TC1724: City/Jazz/BRIO/FIT 1.2L i-VTEC (2014)(BOOT)
Mahindra Bosch EDC17C53 TC1767: XUV500 2.2 CRD (2014)(BENCH BOOT)
Bentley Bosch MG1CS163 TC298: Continental GT W12 6.0 (2018)(BENCH)
Volvo Bosch EDC16C34 MPC562: V70/S80 1.6D (2010)(OBD BENCH JTAG)
Skoda Bosch MED17.1.27: Fabia 1.0 TSI (2017)(OBD BENCH BOOT)
Bentley Bosch MED17.1.62: Bentayga W12 6.0 (2016)(BENCH BOOT)
January 28, 2023
1. BMW MSV90 Protocols BOOT Mode
This time it is for BMW cars with Siemens MSV90 TC1796 ECU. More info on supported cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BMW 5 Series F10 – 530i N53B30A/N52B30B
BMW 5 Series F11 – 530i N53B30A/N52B30B
BMW 7 Series F01 – 730Li N52B30A/N52B30B
BMW 7 Series F02 – 730Li N52B30A/N52B30B
BMW X3 Series F25 – 28i xDrive N52B30A/N52B30B
2. Delphi DCM6.2AP DCM6.2A DCM6.2C DCM6.2V update
Support for all Delphi DCM6.2AP/A/C/V
FoxFlash Compatible operating systems:
foxFlash is now able to perform the following operations: on DCM6.2A/C/V
DCM6.2AP with JTAG_BOOT On the following manufacturer ECU’s:
Recommended minimum requirements:
CPU > 2.5 GHz (Intel i5, i7)
RAM > 4GB
We strongly recommend users to use online mode. The reasons are as follow:
1: We can help you check if your file is correct online.
2: The autochecksum can work online check too.
3: It is safer.
4: The online mode can check if your modifying is correct. If not, we can help to solve the problem.
5: The online mode can auto VR read and write from our server, which mean you can get the original file, and we can help you recover or save your broken ecu.
BTW, if you want to go out or work outside with our tool, just use your phone to turn on a hotpot, ours tool can work with hotpot. You will NOT need any VPN, for we have a wordwide server. No matter where you are, you can connect us.
The online work is easier and safer. Please do NOT let your ecu become a brick without using the online mode.
FoxFlash Operation Modes:
1: OBD mode：
(read the data from Diagnostic port ,you need remove the ecu or tcu from car or open the ecu box , just read everything from car, we also support obd vr read, we supply original file from our server, you can direct obd vr read it )
2: BENCH mode:
we also call it service mode, you can use this mode clone or backup all ecu data, read the internal flash and external flash and eeprom data, so you can save a lot of money for clone ecu and tcu , you also can clone tcu and chiptuning with this mode.
3: Jtag mode:
open the ecu , and wire it or use ours adapter connect ecu ways,some of denso ecu always need use this mode for read and write .
4: Boot mode:
open the ecu and always can backup everything , read the flash and eeprom , you can save some ecu cause your obd write failed, or some others reason cause the ecu dead.
: you can read and write by pinout for most of ecu and tcu
6: BDM mode:
some of the ecu need read and write in bdm mode ,open the ecu and use ours adapter connect it
FoxFlash Supported Functions
Adblue and SCR off
gearbox data to adjust LC
HOT Start Fix
Flaps / Swirl Removal
Sport Displays Calibration
Cold Start Noise Reduction
Speed Limiter Removal
Torque Monitoring Disable
Exhaust Flap Removal
OBD Reading Protection
Boost Sensor Calibration
LC, AL and NLS for MED9.1
vmax, swirl off
restoring ECU or TCU factory setting service
VIN fix (EEPROM support checksum , so you can easy change VIN then write back )
FoxFlash Support types:
- Additional TCU package available for Automatic Transmissions.
Supported Winols damaos supply
As we all know,winols damaos and A2L is very expensive,we supply these to ours customer as free, so you can get it for chitpuning , dtc off, and so on
Supported Control Units
We believe a control units list can be considered as a more safe approach to correctly target the overall tuning procedure due to the fact that a lot of brands offer identical car models & versions that share different Control Unit types.
Please note that foxFlash can help you select the right protocol with its auto-detection feature during identification on most control units.
Multiple connection possibilities:
EXAMPLES OF CONNECTION IN FULL SYSTEM BOSCH / DELCO / DELPHI / DENSO / MARELLI / SIEMENS / CONTINENTAL / TEMIC
BOOT MODE CONNECTION
BENCH CONNECTION WITH AUTOMATIC GEARBOX
Foxflash full package dispaly:
1pc x Master machine
1pc x Fox bench box
1pc x USB cable
1pc x Power adapter
1pc x Fox box store over 10 adpaters
1pc x Jtag and bdm cables
1pc x Pen
1pc x Notebook
1pc x Suitcase
1pc x Function cable for boot, bench, kline links .
1pc x Truck OBD cable
1pc x Car OBD cable
1pc x Paper box
1pc x Install guide
1pc x Main software
1pc x Technical Support
1pc x Login account for software and tools
1pc x PDF pacakges for connecting ecu and tcu
1pc x Join facebook group for support
1pc x Online chat support for use
Extra pacakge according to users request after the user get the tool.
1pc x Tuner account
1pc x Helpdesk
1pc x WinOLS damaos, A2L
NOTE: Send your register email to firstname.lastname@example.org to activate your account. Then download free damos files.
Whatsapp:+8618046220975If you have any questions, please do not hesitate to contact us.
FoxFlash installation guide
How to use foxFlash Manager and foxFlash software
1 go to https://www.dfb-technology.com/download.html download foxFlash Manager app
2.install this software on your laptop
3 register this app with your email
4 input your code which tie on your device, don’t spead yours sn to internet, or others guy will try to stolen your tools password
5 connect your foxflash tool to laptop via usb cable then click the download button which in foxFlash app inside
After download finish,pls open the folder C:\Program Files (x86)\FoxFlashManager\foxflash\DFB Technology\DFBTech_DRIVER
Install the drivers
6 disconnect your foxflash tool , then plugin the usb again
7 click the foxflash manager app active button till actived, then run the foxFlashappin your desktop, then input the password at the windows, click login
8: Close your software: click the close button on foxFlash Manager app, then click the foxflash exit button, you totally close ours tool and software .
9: NOTE: always run foxflash manager app each time when you need use ours tool.
Run it then click the active button, it will keep let the tool access ours server . Download just need do at the frist time you don’t have the software.