[HQ Full Chip Version] Tactrix Openport 2.0+ECUFLASH ECU Flash Cable J2534 for Toyota Ford Mazda JLR Subaru Mitsubishi Supports WIN10

Product Description

• Tactrix Openport 2.0 is compatible work with Pcmtuner dongle.
• Openport is better than pcmtuner hardware in Honda PGM-FI and Mitsubishi ECUs. 

​​​​​​​Openport 2.0 Highlights:

• Field upgradeable software

• J2534 PassThru supports Windows DLL

• New full chip new module plan, fast high speed transfer and very stable function.

• New PCB with inductance to increase voltage, suitable for tuning car under different voltages.

• Tactrix Openport 2.0 was excellently tested with Toyota, Ford, Mazda, Land rover, and Jaguar software

• OpenPort 2.0 EcuFlash software is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles

• The Openport J2534 is also compatible with Mercedes Xentry Passthry, VW Audi Skoda, Ford, Mazda software.
  (We don't provide software and after-sale service support if you use other third-party software)

Tactrix Openport 2.0 J2534 Passthru Specifications:

• RGB status LEDs

• 72Mhz 32-bit processor

• USB 2.0 full-speed device (USB-A/Mini cable included)

• Able to log from Innovate Motorsports 2.5mm stereo MTS data bus

• Standalone data logs to microSD / microSDHC card without a laptop

• Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector

NOTE:

• Close anti-virus programmer when run software.

• Computer System Requirement: Windows XP/Win 7 32bits---CD Software request

• DO Not connect the Internet when you use it otherwise device will cause device damage.

• A computer with Intel processor is strongly recommended. Better not use PC with AMD processors.

• CD will maybe easily broken in shipping way,so if CD can't readable,please DO CONTACT us to send you download link

• The latest version of the USB driver can not be used! Please Only Use our CD's USB driver! Otherwise the product will be damaged!

• There is a New version of 1444870_win software on the official website, don't install this new software with this Openport, otherwise will damage the unit!

Openport 2.0 Supported Protocols:

• CAN 2.0

• KWP2000/dual K-line

• CAN/ISO15765 and K-line

Package list:
1 pc x Tactrix Openport 2.0+ECUFLASH Cable
1 pc x USB Cable
1 pc x ECUFLASH software CD

Openport 2.0 Software List:

Openport 2.0+ECUFLASH
TIS Techstream V9.30.002
TIS 8.30.023 Activation
TIS Techstream V8.20.019
TIS Techstream V8.30.023（We also provide the latest version of Tis Techstream）
*VDF_L_DVD158_V5
*JLR158 License SW
SDD_DVD158.02
SPA_DVD158_V2
VDF_J_DVD158_V5
*SDD_DVD158_FULL

Free download openport 2.0 software

For ecu flash you can get info from this list:

OpenPort 2.0 Cable PCB Display: