The OTB1.0 adapter is suitable for foxFlash extended application engine and transmission computers, and is also suitable for ACM and DCM computer modules.This OTB adapter only work for Foxflash programmer.Ensure that foxFlash can be expanded to the OTB mode of BENCH PLUS in any OBD working mode.
Foxflasher OTB 1.0 Adapter for Foxflash Programmer
The OTB1.0 adapter is suitable for foxFlash extended application engine and transmission computers, and is also suitable for ACM and DCM computer modules.
Adapter only, hardware is not included.
For Foxflash programmer ONLY (If it is forced to be used with other devices, there will be a 75% chance of burning. Equipment damage due to this problem is not covered by after-sales service. ). Don't need to connect with bench box.
OTB Adapter design purpose:
- 1: Ensure that foxFlash can be expanded to the OTB mode of BENCH PLUS in any OBD working mode
- 2: Achieve high-speed reading and writing
- 3: Ensure communication security and prevent the possibility of ECU brick due to voltage instability.
- 4: OTB reading and writing in OBD offline mode
- 5: ECM, TCM, ACM, DCM direct desktop mode reading and writing
Foxflasher OTB Adapter Supported functions:
- 1: Dual-channel high-speed CAN
- 2: Three-way BOOT
- 3: Dual VCC power supply
- 4: GPT encryption and decryption function
- 5: Adaptive resistance
- 6: Adaptive CNF signal adjustment
- 6: Improve the reading and writing speed of some OBD drivers
Supported models and list
go to foxFlash website, log in to the browser at the above address and search for OTB to view the models and models that support OTB.
If the query mode cannot be displayed when opened, please clear the browser cache and reopen the website.
Or Search OTB coverage in Foxflash ECU/TCU Driver List
1PIC OTB 1.0 expander
1SETS OTB 1.0 conversion cable
1PC Paper box
Whatsapp:+8618046220975If you have any questions, please do not hesitate to contact us.
Foxflash Read and Write Mercedes CRD3.x ECU with OTB Adapter
Where to find foxflash OTB adapter pinouts?
Open the foxflash manager install folder there is a folder called ‘Document’.
The OTB pinout can be found in the document folder.
PDF format in 'Help' folder or check online version via browser.
Search desired ECU type, for example Mercedes CRD3.20
You will see bench pinout
With OTB adapter, only need to connect GND, VCC, CAN H and CAN L.
Just check his CAN H, CAN L, VCC, GND then back to OBD driver connect with OTB. Don’t need to connect GPT.
If have Kline you also need connect Kline.
Foxflash read and write Mercedes CRD3.x via OTB mode
Connect to foxflash OTB adapter
Connect OBD cable to OTB adapter and add 12v power
In foxflash car obd, select Mercedes then C calss, then CRD3.x
We will use the fast canbus driver